Automatic Tire Deflator, 6-30 PSI Tyre Deflator Kit with Storage Bag for Car, Tires, Truck, Motorcycle, Jeep and ATV (4 Pack)
Automatic Tire Deflator, 6-30 PSI Tyre Deflator Kit with Storage Bag for Car, Tires, Truck, Motorcycle, Jeep and ATV (4 Pack)
Couldn't load pickup availability
- No tools required. Adjust tyre pressure from 6 to 30PSI in increments of 3PSI. (Actual time may vary depending on tire size and PSI drop desired)
- Set of 4 brass tyre deflators for deflating tyres to increase the traction of different terrains such as snow, mud and sand.
- Pre-set your desired pressure on the adaptors and then they are ready to use when you need them most.
- Simply screw the tyre deflators onto any standard valve and leave for a few minutes until the pre-set pressure has been reached.
- Made of brass, eliminate rust, easy to disassemble and clean.
Spurtar Tire Deflators and 6-30 PSI Tyre Deflator Kit - Adjustable, Automatic for car, Truck, Motorcycle
When you want to air your tires down quickly and easily, a set of Tire Deflators might just be the ideal answer. The standard duty model is adjustable from 6 to 30 PSI, though the factory 18-psi preset is ideal for most applications.
FEATURES
ā
No tools required
ā
Can be used on any standard valve stem
ā
Adjust tire pressure from 6 to 30psi. in 3psi increments
ā
Easily disassembled to clean out sand or dirt
ā
Simply thread onto stems and walk away
ā
Manual start/stop valve built in
ā
Made from 100% brass material to eliminate rust
ā
Air immediately releases from tire once screwed on
ā
QUALITY GUARANTEE ā ADD to YOUR BASKET!!!
PRODUCT DETAILS
- Material: Brass
- Pressure Range: 6-30 PSI
- Overall Size: 12x39mm/0.47x1.54"
- Interface Diameter: 8mm/0.31"
HOW TO USE
Step 1: Deflate a spare/extra tire to your preferred deflation pressure
Step 2: With the lock ring and adjusting cap wound down, screw your deflator on the valve stem. (Be sure to make sure the threads are clean and in good condition)
Step 3: Loosen cap (counter-clockwise) until deflator pops open, then immediately tighten the cap to the position where the air stops exhausting
Step 4: Turn lock ring up to adjust cap and tighten
Step 5: Installation is now complete and set to your preferred deflation pressure
NOTE: When the tire pressure and the deflator setting within 8psi, a manual start may be required by fitting the deflator then lifting the center pin to start operation
PACKING INCLUDE
4 x Tire Deflator
Share
